Aerosol Jet Printer AJ 300-UP
- Approximate overall dimensions are 864 mm D x 1372 mm W x 2322 mm H (with hood; does not include dimensions for ErgoArm and monitor).
- Overall weight of the Aerosol Jet 300 Print System is approximately 680 kg.
- Stainless Steel Cabinet with Granite Table Top.
- Ability to print on substrates up to 300 mm x 300 mm.
- X-Y motion positional accuracy down to +/- 6 μ
- 300 mm XY automated control and 50 mm Z-axis automated Control
- Motion repeatability +/- 1 μm for each axis.
- Visual alignment system – alignment cameras and lightning enable registration of line over line with multiple passes.
- Computer control system of printing parameters in AutoCAD format.
- Heated Vacuum Platen.
Printing Head Schematic design
Process parameters
| Process Parameter | Unit | Range |
| Z axis Height | millimeters | 0-50 |
| Nozzle Diameter | microns | 150, 200, 300 |
| Platen Temperature | °C | Room temperature – 120 |
| Tube Heater Temperature | °C | Room temperature – 120 |
| Sheath gas flow rate | Cubic centimeter | 30 – 100 |
| Virtual Impactator flow rate | Cubic centimeter | 400 -1100 |
| Atomizer flow rate | Cubic centimeter | 500 – 1200 |
Pulse Forge 1300 Novacentrix
Photonic curing machine for sintering a wide variety of inks deposited on conventional and non-conventional substrates, such as paper, cotton, plastics.
| Peak radiant power delivered (kW/cm2) | 35 |
| Max radiant energy delivered (J/cm2) | 100 |
| Max voltage to lamp(s) | 950 |
| Effective max linear processing speed (m/min) | 30 |
| Curing dimension per pulse (mm) | 75 x 150 |
| Max area cured per sample (mm) | 300 x 150 |
| Pulse length range (microseconds) | 25–100,000 |
| Pulse length increment (microseconds) | 1 |
| Minimum pulse spacing (microseconds) | 20 |
| Max pulse rate | >kHz |
| Output spectrum (nm) | 200–1500 |
| Uniformity of exposure (point to point) | +/- 2% or better |
